Home page Anfibio Life Patch – 2×3 pcs

Anfibio Life Patch – 2×3 pcs


Repair of inflatable rafts, pools, air beds, and other inflatable products, as well as tents and rain gear, on a temporary basis. No tools are required for quick repairs. Even sticks to wet surfaces and uncoated fabrics!

Availability: 10 in stock

Add to Wishlist
Add to Wishlist
SKU: WES4AFPL02 Category: Tag:

Product Description

Anfibio Life Patch - Options: 2x3 pcs

The patch can be worn in the rain or underwater. Applicable on Polyurethane (all packrafts), Neoprene, PVC, and uncoated Nylon fabric with a denier less than 420. (for repairs on spreydecks and drysuits). Ideal for packraft field repairs (no cleaning needed).

  1. Clean the area around the hole/tear.
  2. Peel off the release paper off the patch. Use the patch that has 1"(25mm) more area beyond the hole/tear.
  3. Stick the patch to the hole/tear, press firmly for 30 seconds.
  4. Work the visible air bubbles out from below the patch, if any.


Please store in a cool, well-ventilated, and dry location. Avoid direct sunlight.

Excursus: Anfibio LifePatch as self-adhesive, temporary tie downs

The Anfibio LifePatch is not only an excellent emergency repair kit, but it can also be used to create a (removable) StrapPlate or GrabLoop on the boat. For modification, refer to the images and description: Draw a square in the center of a large LifePatch with a pen and cut two small strips on two opposite sides with a cutter knife. Then, remove the adhesive film protection from the square and use a small amount of tape to neutralize the released adhesive area. Then, peel away the remaining adhesive protection and secure the modified LifePatch to the desired location on the boat. A strap or a loop can now be pulled through to fasten smaller items (eg throw bag, drinking bottle, etc.).

The removable tie down can also be used to create a new position for a rear back rest, for example. They are, however, a good test for positioning of permanently glued GrabLoops as a temporary solution!

ATTENTION: not suitable for heavy luggage or as a carrying strap!

Tech Specs


  • 2 x  Ø 100mm and 2 x  Ø 50mm
  • 3 x  Ø 100mm and 3 x  Ø 50mm

Use: On surfaces of Polyurethane, Neoprene, PVC, Nylon fabric below 420 denier.